Hi,
I'm using a polycom HDX 7000 HD with H323 protocol and it works fine.
I need today to connect the HDX 7000 with an asterisk pabx server with the SIP protocol.
With this asterisk server I've already connected softphones and cisco phones and an SIP trunk. Everythink works, only the HDX 7000 dont whant to register itself with asterisk.
I've a message "can't connect to the Registrar Server"
Did anyone already succed to connect a HDX 7000 with an asterisk SIP server ?
Best regards
Stephane
Hello @Stephanec ,
Welcome to the Poly Community.
Both the communities Must Read First or Read 1st and if available the FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
Unfortunately, your post fell a bit short of the above-explained requirements and we kindly ask you, therefore, to ensure to read these sections and ensure a reply (not Edit!) provides as much detail as possible
Please ensure you familiarise yourself with the FAQ’s listed in my signature for your convenience.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
If official support is required please check how to phone or open a case here
----------------Hi,
Here is more details about my HDX 7000 HD
System Name: | Perf Tarnos |
Localized System Name: | Perf Tarnos |
IP Address (IPv4) | |
IP Video Number: | 192.168.4.151 |
Public Address: | 185.xxx.xxx.xxx |
IP Address (IPv6) | |
Link-Local: | |
Site-Local: | |
Global Address: | |
Serial Number: | 821417419F41CN |
Software Version: | Release - 3.1.14-56008 |
MAC Address: | 00:E0:DB:41:9F:41 |
Model: | HDX 7000 HD |
Hardware Version: | D |
Current Date: | 25-3-2022 |
Time: | 13:41 |
Country: | France |
Network Interface Type: | None |
ISDN Switch Protocol: | |
Camera: | PAL |
Microphone Version: | 1:0.33 |
I'm using Asterisk 18.3.0 provided by FreePBX 15.0.17.34 as SIP server
Hello @Stephanec ,
We still do not know if you want to register via H.323 or SIP. Asterisk usually does not have H.323 active.
With SIP it should just work
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
If official support is required please check how to phone or open a case here
----------------Hi,
Problem solved !
My concern was about the SIP registration.
I found this in the logs
2022-03-28 13:16:57] WARNING[2298] res_pjsip_registrar.c: Endpoint 'anonymous' (192.168.4.151:5060) has no configured AORs
[2022-03-28 13:17:00] VERBOSE[2298] res_pjsip_registrar.c: Added contact 'sip:102@192.168.4.151:5060' to AOR '102' with expiration of 300 seconds
[2022-03-28 13:17:00] VERBOSE[2298] res_pjsip/pjsip_configuration.c: Endpoint 102 is now Reachable
[2022-03-28 13:17:00] VERBOSE[2298] res_pjsip/pjsip_options.c: Contact 102/sip:102@192.168.4.151:5060 is now Reachable. RTT: 80.293 msec