VVX D60 no Auto Provision


VVX D60 no Auto Provision

OpenSIP Environment using Asterisk 1.8

Model: VVX 300

Firmware: 5.4.5




I currently paired the VVX D60 through the VVX 300 web utility. I set it using Pairing Mode (Automatic) and registered the handset. Everything worked. I then extracted the config file from the VVX 300 to add the changes to my provisioning server. The only information I was able to retrieve was the following:




I then wanted to auto-provision the DECT phone through the updated config file, no dice. What additional information do I need like inputting the Pairing Mode? Thank you.


Message 1 of 3

Re: VVX D60 no Auto Provision

Base Station Information Base Model VVX D60 Part Number XX900027244 MAC Address xx.xx.xx.xx.xx.xx Package Version VVX-D60_DSW-97\0 Firmware Version P-1.5_Release

Message 2 of 3
Polycom Employee & Community Manager

Re: VVX D60 no Auto Provision

Hello Shamrock,

welcome back to the Polycom Community.

This is not possible at present to my knowledge.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services


If official support is required please check how to phone or open a case here

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 3 of 3