I have a VVX 300 , SIP 220.127.116.1130
If I set it to German langauge and I call the configured line, I answer, I hit Transfer soft key (Weiter....), but I cannot input any other number on the transfer screen.
Checked also on English and French , and transfer works fine.
welcome to the Polycom Community.
I currently have a case escalated internally (1-365800541) with the same issue. If you actually wait until the digitmap timers runs out (usually 3 seconds) the transfer button will appear. This could be used as a workaround at present.
For tracking issues please raise this with your Polycom reseller and / or Polycom support.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
If official support is required please check how to phone or open a case here----------------
Thanks for your quick reply, as always!
I couldn't positively test the workaround (waiting did not have any effect - the thing is that after pressing the first digit of the extension I want to dial, I am taken to idle screen where I cannot input any other digits, but I can call from speed dials) but I noticed that by pressing left-right arrows you will reach the call list and you may dial an extension from there, which is an acceptable workaround IMO.