Trying to register a SoundPoint 550 to a Cisco Cal...

IndyTech · ‎12-11-2013

Hello, I'm trying to get one of our SoundPoint IP 550/SIP phones (firmware version 4.02b) to register to our Cisco Call Manger (version 8.6.2), This is the first time we are attempting this and I have not had much luck finding any configuration documentation for the 550 (I' was able to find some third party registration documentation for the call manager). Does anyone have any experience with this and can you provide the required configuration changes for the phone. So far the only thing I've done on the Polycom side is change the registration address in the SIP-Basic file to the CUCM.

SteffenBaierUK · ‎12-11-2013

Hello IndyTech,

welcome to the Polycom Community.

The community's search functionality finds plenty of posts in regards of Cisco CUCM => here <=

Please check => here <= for more details.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓ SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

IndyTech · ‎12-12-2013

Steffen, thanks for the information. The Details document is for the Polycom SoundPoint conference phones. I assume these same instructions will work for the model 550 phones we are trying to register to the CUCM? Do you know if my assumption is correct? Thanks.

SteffenBaierUK · ‎12-12-2013

Hello IndyTech,

our official certification was only based on the SoundStation IP Phones and not on any of our other phones.

All of our phones are utilizing the same software but we officially only support the SoundStation IP products.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓ SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

Nick Hobson · ‎06-04-2014

HI, were you able to get this working. I thinking about a trying this too.

Thanks in advance

Trying to register a SoundPoint 550 to a Cisco Call Manager

Trying to register a SoundPoint 550 to a Cisco Call Manager

Re: Trying to register a SoundPoint 550 to a Cisco Call Manager

Re: Trying to register a SoundPoint 550 to a Cisco Call Manager

Re: Trying to register a SoundPoint 550 to a Cisco Call Manager

Re: Trying to register a SoundPoint 550 to a Cisco Call Manager