Recently received 2 Trio C60's to replace current conference pods-
When powering up the Hub comes up fine
The Device is not recognized by the Hub to do a Pairing
The details state network unavailable on the Device unit
Any help would be appreciated
The device unit boots up to this screen each time
The Hub unit does not see this - it does show Poly Trio C60, but never pairs
Hello @Tom1974 ,
Welcome to the Poly Community.
Both the communities Must Read First or Read 1st and if available the FAQ reference the basic minimum information a new or follow-up post should contain.
This ensures the questions having to be asked are limited and any new or follow-up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
Unfortunately, your post fell a bit short of the above-explained requirements and we kindly ask you, therefore, to ensure to read these sections and ensure a reply (not Edit!) provides as much detail as possible
Please ensure you familiarise yourself with the FAQs listed in my signature for your convenience.
The best and quickest way forward is to contact our Support organization as I can see you already have done so using ticket 34457606 as the community is run by volunteers only.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
If official support is required please check how to phone or open a case here----------------