Speed Dial + Pause

nikita · ‎02-16-2012

I'd like to store a contact number with one or more pauses within it. How can i do it on polycom 601 with firmware 2.2.2 - can you tell me where to find it in admin guide.

thanks.

SteffenBaierUK · ‎02-16-2012

Hello nikita,

I vaguely remember something about a speed dial / contact directory entry that could contain a "p" or a ", " or a " . " to add a pause but could not find any information in the older admin guides.

This was well before my time joining Polycom and it could simply be not possible on these old end of sale units.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

SteffenBaierUK · ‎12-03-2013

Hello all,

I have added an explanation to the community's VoIP FAQ post here:

Nov 4, 2011 Question: How can I change the functionality of an Hardware Button?

Resolution: Please check => here <=

The new Option 4 explains this functionality and you will need to verify the availability with the currently installed software.

This does not directly enable a number to be stored with a pause and uses the efklist as a workaround in conjunction with the local directory.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

SteffenBaierUK · ‎05-20-2021

Hello all,

UC Software 6.4.0 was just released >here< which adds a pause for the VVX range compatible with this release.

Best regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Speed Dial + Pause

Speed Dial + Pause

Re: Speed Dial + Pause

Re: Speed Dial + Pause

Re: Speed Dial + Pause