Solved: Re: Soundpoint and OCS

Knuckles · ‎08-14-2012

Hi,

I want to know if it is possible to integreate Soundpoint Ip phone and VVX with OCS (To get status, send IM).

I know that is possible with Lync, but no information about OCS.

All information that i found for OCS is related with CX phones or HDX system.

jschertz · ‎08-16-2012

UCS integration is only tested and supported with Lync Server 2010, no previous versions of OCS are supported at this time.

-----------
Jeff Schertz - Principal Microsoft Solutions Architect [Blog]
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.

View solution in original post

SteffenBaierUK · ‎08-14-2012

Hello knuckles,

welcome to the Polycom Community.

The UCS 3.3.0 and UCS 4.0.1 both mention the Microsoft Live Communications Server 2005 Integration.

Only the Spectralink 8400 Series has support for Microsoft Office Communications Server 2007 R2 Integration.

I have personally never used either of the above.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

jschertz · ‎08-16-2012

UCS integration is only tested and supported with Lync Server 2010, no previous versions of OCS are supported at this time.

-----------
Jeff Schertz - Principal Microsoft Solutions Architect [Blog]
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.

greiginsydney · ‎08-08-2013

Hi Knuckles,

I've managed to get the SoundPoints to work under OCS 2007 R2 by following the same process as for Lync. The only change we needed was to build a dial plan (aka location profile) into the phone.

I've blogged it here:

https://greiginsydney.com/soundpoint-phones-for-ocs/

G.

SteffenBaierUK · ‎08-08-2013

Hello all,

please bear in mind , as Jeff already replied, that only LYNC is supported.

OCS may work but we would most certainly not take any support calls on this.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections