[Software] Rove 8.0.2

Polycom Employee & Community Manager

[Software] Rove 8.0.2

Hello all,


we just released Rove 8.0.2 software for the B2, B4, R8, Rove 40 and Rove 30


What’s New in This Release

These release notes provide important information on important field fixes and the following new features:

  • Request Configuration Files with a check-sync SIP NOTIFY Message
  • DTMF Enhancements

Request Configuration Files with a check-sync SIP NOTIFY Message

Poly Rove DECT IP phones can request configuration files from the provisioning server when they receive a check-sync SIP NOTIFY message. This enables you to resync and push new configurations to devices without rebooting the system. This feature is enabled by default. 

To disable this feature:

  • In the system web interface, go to Service Providers > Common Settings > SIP.
  • Enable X_AcceptResync to no.

DTMF Enhancements

This release adds a new DTMF Inband method. System now supports four types of DTMF methods, which include the following options:

  • Inband (new)
  • RFC2833SIP
  • SIPInfo
  • SIPInfo + RFC2833

Added support to configure DTMF Inband tone length, delay, and volume.


Older Releases:



If official support is required please check how to phone or open a case here

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections