we are pleased to announce the UC Software 126.96.36.19941 release for both the Polycom Trio 8800 and Polycom Trio 8500.
UC Software 5.5.3 enables users to discover and connect to Polycom Trio 8800 over AirPlay using Bluetooth when the Polycom Trio system and Apple device are on different networks. When Bluetooth is enabled on the Apple device on Polycom Trio 8800, users can connect to a Polycom Trio 8800 that is on a different network and share content during in-room meetings using AirPlay.
While the Apple device and Polycom Trio 8800 can be on different networks, the two networks must be able to communicate in order for the Polycom Trio to display as an available AirPlay on the Apple device.
When this feature is enabled, the Bluetooth radio on Polycom Trio 8800 is automatically turned on, as long as Bluetooth is enabled on the system.
You can configure AirPlay discovery over Bluetooth using the following parameter:
To activate this feature, ensure the following parameter/value pairs are set:
One-touch join of a conference bridge with access code from the Calendar:
When Join is selected for a meeting invitation where the Location field is populated in the Required Format (see below), the <access code> will automatically be dialed one second after connecting to the <conference bridge>.
Required Format for Location field: <conference bridge number>,<access code>
NOTE: The body of the meeting invitation is not searched for the <access code>. It must be in the Location field.
If official support is required please check how to phone or open a case here----------------