Softkey - Blind Transfer


Softkey - Blind Transfer


I have created an EFK so I can use it as a soft key to do a blind transfer based on previous post on this forum. Now i got it working but i would like to take it out the 1 second pause or if someone can tell me a different way of being able to do a blind transfer without using to many keys Basicsally as a soft phone


efk.efklist.3.action.string="$FTransfer$$Cpause1$$FSoftKey3$" efk.efklist.3.label="BlindTransfer" efk.efklist.3.mname="blndxfer1" efk.efklist.3.status="1" efk.efklist.3.type="invite"


softkey.4.action="!blndxfer1" softkey.4.enable="1" softkey.4.insert="1" softkey.4.label="BlindXfer" softkey.4.precede="1""1" softkey.4.use.alerting="0" softkey.4.use.dialtone="0" softkey.4.use.hold="1" softkey.4.use.idle="0" softkey.4.use.proceeding="0" softkey.4.use.setup="0"


Polycom IP 650 phones with Version Bootrom Software Version

Message 1 of 2
Polycom Employee & Community Manager

Re: Softkey - Blind Transfer

Hello surgemorales,


is this related to your other post => here <= ?


If you simply want to remove the 1 second pause you should attempt to just leave out the:



 I am not sure if this is what you are after so please be a bit more specific.


Best Regards


Steffen Baier


If official support is required please check how to phone or open a case here

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓ SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 2 of 2