I've got a customer site where the front desk person is complaining that when she is on a call (IP650) she can hear a ringing in the background of the call. The person she is talking to can not hear it, but she can.
It seems to be intermittent, so I can't debug the exact situation where this is happening.
Has anyone else run into this? Any ideas where to look?
Solved! Go to Solution.
I would recommend software upgrade if you were not already running the UC 3.3.1f software.
At this point, my recommendation would be to click on the link below to create an account (if you don't have one already) and then create a service request with our PGS(Polycom Global Support) group to assist you further.
http://support.polycom.com/PolycomService/home/home.htm
When you create a ticket please included your configuration files and an unfiltered capture taken at the phone while the issue is being reproduced for support's analysis. You can use the attachments tab to upload files to your case.
Thank you,
-Hugo
Hello,
Would you please provide us with the software version(SIP and BootROM) running on this SoundPoint IP 650?
Thank you,
-Hugo
I've tried SIP 3.3.1 and 3.3.0. Both with Bootrom 4.3.
I would recommend software upgrade if you were not already running the UC 3.3.1f software.
At this point, my recommendation would be to click on the link below to create an account (if you don't have one already) and then create a service request with our PGS(Polycom Global Support) group to assist you further.
http://support.polycom.com/PolycomService/home/home.htm
When you create a ticket please included your configuration files and an unfiltered capture taken at the phone while the issue is being reproduced for support's analysis. You can use the attachments tab to upload files to your case.
Thank you,
-Hugo
Same here, we have run into the same issue... so it's definitely not a one-off, perhaps they have introduced a bug into 3.3.1, as going back to the 3.2.2 firmware, they are no more complaints.
Hello Pkaplan,
68267 in the new UCS 3.3.2 Release should address this issue.
Best Regards
Steffen Baier
If official support is required please check how to phone or open a case here
----------------NOT SOLVED
The issue is still very much an issue, and as profit-losing for polycom as last year.
Steps taken sofar
Polycom firmware:
3.2.2
3.2.5
3.2.6
Asterisk
1.6.2.20
1.6.2.22
1.8.8.1
1.8.9.0
standard extension macro
s,1,answer()
Scenario
1) A caller is on the phone
2) A new call comes in
3) Caller hears annoying ringing
@fixit wrote:
NOT SOLVED
Follow up to the unrelated reply => here <=
If official support is required please check how to phone or open a case here
----------------