Ringer Volume parameter through .cfg file

icsnettech · ‎08-08-2011

Hi,

I am unable to locate the correct parameter for the phone to remember the ringer volume or to specify a specific ringer volume for the phones.

I use voice.volume.persist.handset="1" to set the phone to remember the handset volume although am unable to locate the same parameter for the ringer volume.

SteffenBaierUK · ‎08-08-2011

Hello icsnettech,

this feature is currently not supported in UCS 3.3.x and previous SIP Versions.

The upcoming UCS 4.0.0 will introduce this feature according to the UCS 4.0.0 Admin Guide:

• Persistent Ring—Changes made to the ringer volume by the user persistafter the phone reboots.

Best regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

icsnettech · ‎08-08-2011

Hi,

What volume does the phone default to after a call for the ringer?

Or does it get adjusted only on phone reboot?

SteffenBaierUK · ‎08-09-2011

Hello icsnettech,

as long as the Phone is not rebooted the Volume stays at the Level the User can manually adjust.

It will reset to the factory default once rebooted.

Please read the Using Custom Ring Tones on SoundPoint IP, SoundStation IP, and Polycom VVX 1500 Phones that can be found at the Polycom Technical Bulletin Site => here <=

Above explains how a "loud" ring tone can be added that may suit your environment and you could use your own louder Ring Tone until the UCS 4.0.0 is released for your Phones.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

Telco-T · ‎08-20-2014

What is the .cfg setting to get a ringer setting to persist after reboot when running 4.0.3.7314?

I have tried the following with no positive results. Range I am using is -21 to 0

Ringer Volume parameter through .cfg file

Ringer Volume parameter through .cfg file

Re: Ringer Volume parameter through .cfg file

Re: Ringer Volume parameter through .cfg file

Re: Ringer Volume parameter through .cfg file

Re: Ringer Volume parameter through .cfg file