Hello @TechFm ,
Welcome to the Poly Community.
Both the communities Must Read First or Read 1st and if available the FAQ reference the basic minimum information a new or follow-up post should contain.
This ensures the questions having to be asked are limited and any new or follow-up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
Unfortunately, your post fell a bit short of the above-explained requirements and we kindly ask you, therefore, to ensure to read these sections and ensure a reply (not Edit!) provides as much detail as possible
Please ensure you familiarise yourself with the FAQs listed in my signature for your convenience.
For example this post here:
Jan 16, 2014 Question: How can set the Handset/Speaker/Headset volume to a persistent setting / remember the volume?
Resolution: Please check => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
----------------
If official support is required please check how to phone or open a case here
----------------
The title Poly Employee & Community Manager is a community setting and
does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.
----------------
⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
