A recently purchased Polycom Trio 8500 is acting weird.
Firmware version: 126.96.36.19905
MAC address: 64:16:7F:1D:8D:5C
The symptom: The phone is set up in our Voice VLAN, where every other Polycom devices are (CX600, CX3000) and the device only once could communicate with the DCHP server, acquiring IP address and provision the phone in our system (I configured it beforehand), but since a restart it says DHCP Failed and there is no network connectivity even when I set up manually the IP address and other server options. I tried to factory reset the phone and re-configure everything but since that particular restart, it does not want to work at all. Tried on the same network port I used to configure the device, tried another port, but no luck.
Is there anything I'm missing?
Looking forward to your help,
*** UPDATE: I have rebooted the phone several times. The phone boots, acquires the correct IP address/time. Then it says "invalid provisioning". The phone restarts one more time with the same symptom, then at the 3 rd restart it says Time/date out of sync and DHCP failed.
Solved! Go to Solution.
welcome to the Polycom Community.
Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup
Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition other details allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up post’s.
As our Phones have far more sophisticated abilities to detect VLAN's, DHCP Options and many more features a log would be of interest.
Settings > Logging > Global Settings > Global Log Level Limit > Debug
Settings > Logging > Global Settings > Global Log Level Limit > Log File Size (Kbytes) > 10240
Settings > Logging > Module Log Level Limits > DHCP Client > Event 1
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
If official support is required please check how to phone or open a case here----------------