Hello -
I've searched the forum and haven't found any resolutions. Thanks for your help on this.
Phone Model SoundStation IP 7000
Part Number 3111-40000-001 Rev. 1
SIP Software Version 3.3.3.0069
BootROM Software Version 4.3.1.0887
Outbound calls from the Polycom fail at 1 minute every try. Inbound calls to the Polycom have no issues. Checked router settings, firewall settings, PBX settings... Class Of Options, SIP Device Capabilities, etc and all look ok. Plus, I can't find any setting that even has 60 seconds. If I call outbound and put the call on hold for 23 seconds (for example)...The call will go past the 1 minute mark but will then drop at 1 minute and 23 seconds. Are their any known solutions for this?
Thanks again,
Bobby
Hello Bobby,
welcome to the Polycom Community.
The community's VoIP FAQ contains this post here:
Jan 19, 2012 Question: How to troubleshoot Polycom VoIP related Issues?
Resolution: Please check => here <=
You can utilze the above to try and troubleshoot this issue as this is 100% caused in your network as the phone would not drop the call on its own.
You may also want to consider upgrading the phone to UC Software 4.0.8 as explained here:
Oct 7, 2011 Question: How can I setup my Phone / Provisioning / Download / Upgrade / Update / Downgrade Software?
Resolution: Please check => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------Hello Bobby,
the FAQ post covers all phones depending on the current software they are running.
Any phone not running UC Software 4.0.0 or later cannot be upgraded via the web interface and need either a TFTP/FTP or HTTP server.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------Steffen -
I went through and updated everything but still have the issue. Are you 100% sure I can rule out the Polycom? If so, that's great. I will continue to look over the FAQ. Thanks for your help.