I read on the pdf file of the release notes of Trio's software version 5.9.2.AA the following: "This allows users to join Webex meetings from meeting reminders as well as dedicated line keys on their Poly Trio Systems"
I suppose that from this version and from now on we can join directly on a webex meeting from Poly Trio equipment. Sorry if i misunderstood this.
Is a CUCM registration prerequisite for this service, so the Trio can join on a meeting like this?
Ι tried to connect directly to a webex meeting from the Trio unsuccessfully.
Furthermore is there a H.323 gateway or a SIP gateway besides22.214.171.124 or email@example.com?
Thank you in advance for your time and responses.
Solved! Go to Solution.
Hi I have tried with your solution but still no luck.
Could you please help me with this?
My Trio 8800 never works for WebEx and Poly engineers cannot find a solution for more than a year.. what a disaster
Hello @LGES ,
Welcome back to the Poly Community.
Could you kindly clarify your latest statement as the Trio was not released as a WebEx device. It all depends on your setup if something works or not.
Do you have set up a working calendar and do you have a STUN server? If you have involved Poly support I suggest you continue to get them to troubleshoot this or get an official answer that without a Cisco Call Manager this is not possible.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
If official support is required please check how to phone or open a case here----------------
Hi @SteffenBaierUK ,
Poly Engineer has advised that the calendar exchange for Webex is only allowed when CUCM is registered and I don't think that it is true. and I am not sure what STUN server is.
The reason I came to this community is that this same issue has not been resolved with local Poly engineers for a year.
That configuration worked for me the time i wrote the post.
That was only for the Trio series
For about one year this does not work anymore. Webex changed a lot of things on the way you could call a room.
Stun server was necessary for the call to succeed. It was a public STUN server.
Exchange server was not necessary but it was the config, because Trio had multiple different lines registration like SFB, IP-PBX, Zoom etc.
Attached you can find my Trio 8800 config in order to join to a webex meeting.
This is working for me and i can call firstname.lastname@example.org and join in a webex meeting
This config is for Trio's line 3.
Do the appropriate changes and try again
I hope it would help you.