Solved: Paging Groups Setup

JBen · ‎01-29-2015

We are running into issues getting paging to work how we want. On our polycom vvx 410 phones we are configuring 3 seperate groups. One to page the shop, one for the office, and one that pages everything. The picture I am attaching will show how we have set up these groups. The issue is that a person with an office phone would like to be able to page the shop but not hear when the shop gets paged. So an office phone is set up with yes on available and send, and then no on subscribe. From what I have read in the manuals and online this is how it should be setup. So when I go to the phone to page the shop group it is not appearing on the phone menu. So I cannot page the shop. Is there something we are missing?

SteffenBaierUK · ‎02-10-2015

Hello JBen,

As mentioned already I opened an internal ticket (VOIP-98244). It looks like at present there is no option that would do what you are after.

I can only suggest to work with your Polycom reseller to raise this as a feature request.

The reason for this and details are explained => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

View solution in original post

SteffenBaierUK · ‎01-29-2015

Hello JBen,

welcome to the Polycom Community.

It is always useful to include the currently used software version as issues experienced may already be addressed in a newer release.

This also allows yourself and others to check against current software release notes.

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP UC Software Version or the BootROM Version of my Phone?
Resolution: Please check here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

JBen · ‎01-29-2015

Thanks I meant to include that. All of our phones are running the latest UC Software Version 5.2.0.8330.

JBen · ‎02-02-2015

Any ideas on this. Does my post make sense? We have it setup in a way that makes sense. Why would unsubscrbing to a certain group not let us page to it? We have it set to available and yes to send. We just don't want to subscribe to it to hear the pages.

SteffenBaierUK · ‎02-02-2015

Hello JBen,

I am checking this currently internally. Once I receive some feedback I will get back to yourself.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

JBen · ‎02-09-2015

I hate to keep bumping this or come off as impatient, but have you guys had any luck with this?

SteffenBaierUK · ‎02-10-2015

Hello JBen,

As mentioned already I opened an internal ticket (VOIP-98244). It looks like at present there is no option that would do what you are after.

I can only suggest to work with your Polycom reseller to raise this as a feature request.

The reason for this and details are explained => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

JBen · ‎02-10-2015

Thank you we appreciate your help.

SteffenBaierUK · ‎02-11-2015

Hello JBen,

I actually received word that this is planned for the next UC Software release 5.2.3 and all later releases after this.

I do not yet have an ETA for this.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

SteffenBaierUK · ‎05-06-2015

Hello JBen,

UC Software 5.2.3 was released and has this new feature added:

VOIP-98244 Parameters have been added to allow receiving PTT calls on a specified channel or on a specified group. These parameters are ptt.channel.x.allowReceive and ptt.pageMode.group.x.allowReceive.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

Paging Groups Setup

Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup

Re: Paging Groups Setup