Hi All,
Just got a rebuilt SoundStation IP 6000. I am using it with a 802.3af POE injector. Tried two injectors and all I get is the three lights on top blinking about every 5 seconds. The display stays blank. Do I need to use the Polycom injector cable, will it not work with an industry standard injector ? I see nothing in the docs that seems to indicate that ? All thoughs are welcome !
Thanks,
Denis
Solved! Go to Solution.
Hello Denis
I am not aware of any specific pattern indicating an issue and I would have to look at the physical unit with a special cable to determine if the unit is faulty or not.
WIthout knowing the MAC address I cannot look up the unit and its history internally.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------Hello Denis F,
welcome to the Polycom Community.
I am unsure what rebuilt means but is this a second hand unit and/or can you provide more details on this unit?
The SSIP6000 does support standard IEEE 802.3af Power over Ethernet.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------Hi Steffen,
This is a refurbished unit, apparently it was returned somewhere and they fixed/checked it out and resold it.
Since my POE device (both of them !) don't seem to power this unit, can you tell me the Polycom part numbers that I would need to buy ?
Also, what does it mean when all three LEDs blink every few seconds and the screen stays blank ? Perhaps this unit is broken ?
Thanks for your help,
Denis
Hello Denis
as long as you PoE power supply supports the above PoE standard the unit should work.
The Part Number for a charger in the different areas in the world are:
2200-42740-001 | AC Power Kit for SoundStation IP 6000 and Touch Control. Includes 100-240V, 0.4A, 48VDC power supply, 6ft/1.8m power cord with NA plug and Power-over-Ethernet Insertion Cable (PIC). |
2200-42740-002 | AC Power Kit for SoundStation IP 6000 and Touch Control. Includes 100-240V, 0.4A, 48VDC power supply, 1.8m power cord with Japan plug and Power-over-Ethernet Insertion Cable (PIC). |
2200-42740-012 | AC Power Kit for SoundStation IP 6000 and Touch Control. 100-240V, 0.4A, 48VDC. Includes PSU, POE Power Injector Cable and local cordset with Australia/New Zealand plug. |
2200-42740-015 | AC Power Kit for SoundStation IP 6000 and Touch Control. Includes 100-240V, 0.4A, 48VDC power supply, 1.8m power cord with UK plug and Power-over-Ethernet Insertion Cable (PIC). |
2200-42740-016 | AC Power Kit for SoundStation IP 6000 and Touch Control. Includes 100-240V, 0.4A, 48VDC power supply, 1.8m power cord CEE 7/7 plug for Korea only and Power-over-Ethernet Insertion Cable (PIC). |
2200-42740-022 | AC Power Kit for SoundStation 6000 and Touch Control. Includes 100-240V, 0.4A, 48VDC power supply, 1.8m power cord with China plug and PoE Power Insertion Cable (PIC). |
2200-42740-119 | AC Power Kit for SoundStation IP 6000 and Touch Control. Includes 100-240V, 0.4A, 48VDC power supply, 1.8m power cord with Switzerland plug and Power-over-Ethernet Insertion Cable (PIC). |
2200-42740-122 | AC Power Kit for SoundStation IP 6000 and Touch Control. Includes 100-240V, 0.4A, 48VDC power supply, 1.8m power cord with CEE 7/7 plug and Power-over-Ethernet Insertion Cable (PIC). |
2200-42740-125 | Universal AC Power Kit for SoundStation IP 6000 and Touch Control. Includes 100-240V, 0.4A, 48VDC power supply and Power-over-Ethernet Insertion Cable (PIC). DOES NOT INCLUDE AC POWER CORD. |
2215-07155-001 | Expansion (EX) microphone kit for SoundStation VTX 1000 and SoundStation IP6000. Includes two EX mics and two 7ft/2.3m cables. Does not include China |
The statement that someone else than Polycom has looked at the unit would make me worry as only Polycom can repair or service these units.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------Hi Steffen,
Great, thanks for that info.
Do tell though, what is indicated by the blinking LEDs and a blank screen ? I wouldn't want to buy the power adapter if this unit is faulty.
THanks,
Denis
Hello Denis
I am not aware of any specific pattern indicating an issue and I would have to look at the physical unit with a special cable to determine if the unit is faulty or not.
WIthout knowing the MAC address I cannot look up the unit and its history internally.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------