Hello again Syamand,
we fully understand your problem and I had already replied to you on multiple occasions and provided several responses.
On the 29.04.2013 I replied => here <= in regards of the pre UCS 3.3.0 already in your other post.
You have basically already answered your own question:
"when i connect the phone back to my digum switch box and put the http provision server to the phone then the phone seem to be loading old apps from the provisioning server"
We, the community, are not aware what apps and configuration your digium switch box contains.
As you figured out yourself already that it is "loading old apps from the provisioning server" why do you not update the Digium box?
This is outside the scope of the Polycom community and you need to inquire in the Digium community how to update to the latest Polycom software.
By pointing your phone back to the HTTP server the phone attempts to load an old SIP application and due the missing downgrader this fails. It then aborts this attempt and loads an old, unsupported configuration, which triggers the pre UCS 3.3.0 message.
All this is explained in detail within the community FAQ and uncountable answered posts.
In addition attempting to download a new UCS Software prompts you to acknowledge the changes that are necessary to be able to use this software.
I will copy & paste this here again for you to read and understand:
1) Before you can successfully install UC Software 4.0.x onto phones running Polycom® UCS released prior to version 4.0.0, you must perform a required upgrade procedure using the Polycom® Upgrader 4.0.0 Utility.
Before you download and install Polycom® UC Software version 4.0.x or higher, Polycom strongly recommends that you review the changes to the upgrade procedures detailed in the Polycom® UC Software 4.0.0 Administrators’ Guide or newer and Engineering Advisory 64731 Polycom® UC Software 4.0.0: Upgrade and Downgrade Methods.
2) With the release of UCS 3.3.0, the configuration files, their respective parameters and defaults, as well as the provisioning methods have been simplified and also extensively modified in comparison to prior releases. THESE CHANGES ARE NOT BACKWARD-COMPATIBLE with configuration parameters used in previous software releases. Before downloading and installing the software, Polycom strongly recommends that you become familiar with the changes described in the Administrator’s Guide for the Polycom® UC Software – 3.3.0 or newer and Technical Bulletin 60519 Simplified Configuration Improvements in Polycom® UC Software 3.3.0.
Above clearly tells you:
As you can hopefully see by the above explanation you either need to do some work on the Digium Box (i.e. follow this up in the Digium community) or manually provision your phones.
If official support is required please check how to phone or open a case here----------------