FTP Provisioning of IP650 and IP331 failing to wor...

icsnettech · ‎07-24-2011

Hi,

I have referenced a config file called messagecentre.cfg in my 12x0.cfg file which applies to all polycom phones on the network.

The contents of both files are shown below, and when the phone boots it fails to get the expected change which is the phone dialling *4 when a user presses the messages button or selects to connect to the message centre upon an active MWI.

**************** 000000000000.cfg FILE ****************

<?xml version="1.0" standalone="yes"?>
<!-- Default Master SIP Configuration File-->
<!-- For information on configuring Polycom VoIP phones please refer to the -->
<!-- Configuration File Management white paper available from: -->
<!-- http://www.polycom.com/common/documents/whitepapers/configuration_file_management_on_soundpoint_ip_phones.pdf -->
<!-- $RCSfile: 000000000000.cfg,v $  $Revision: 1.23.8.5 $ -->
<APPLICATION APP_FILE_PATH="sip.ld" CONFIG_FILES="[PHONE_MAC_ADDRESS]_phone.cfg, polling.cfg, ntp.cfg, messagecentre.cfg" MISC_FILES="" LOG_FILE_DIRECTORY="" OVERRIDES_DIRECTORY="" CONTACTS_DIRECTORY="" LICENSE_DIRECTORY="">
<APPLICATION_SPIP300 APP_FILE_PATH_SPIP300="sip_213.ld" CONFIG_FILES_SPIP300="phone1_213.cfg, sip_213.cfg"/>
<APPLICATION_SPIP500 APP_FILE_PATH_SPIP500="sip_213.ld" CONFIG_FILES_SPIP500="phone1_213.cfg, sip_213.cfg"/>
<APPLICATION_SPIP301 APP_FILE_PATH_SPIP301="sip_316.ld" CONFIG_FILES_SPIP301="phone1_316.cfg, sip_316.cfg"/>
<APPLICATION_SPIP501 APP_FILE_PATH_SPIP501="sip_316.ld" CONFIG_FILES_SPIP501="phone1_316.cfg, sip_316.cfg"/>
<APPLICATION_SPIP430 APP_FILE_PATH_SPIP430="sip_323.ld" CONFIG_FILES_SPIP430="phone1_323.cfg, sip_323.cfg"/>
<APPLICATION_SPIP600 APP_FILE_PATH_SPIP600="sip_316.ld" CONFIG_FILES_SPIP600="phone1_316.cfg, sip_316.cfg"/>
<APPLICATION_SPIP601 APP_FILE_PATH_SPIP601="sip_316.ld" CONFIG_FILES_SPIP601="phone1_316.cfg, sip_316.cfg"/>
<APPLICATION_SSIP4000 APP_FILE_PATH_SSIP4000="sip_316.ld" CONFIG_FILES_SSIP4000="phone1_316.cfg, sip_316.cfg"/>
</APPLICATION>

********** messagecentre.cfg FILE *****************

<?xml version="1.0" standalone="yes"?>
<PHONE_CONFIG>
   <MSG msg.mwi.1.callBackMode="contact" msg.mwi.1.callBack="*4" msg.bypassInstantMessage="1"/>
   </MSG>
</PHONE_CONFIG>

SteffenBaierUK · ‎08-06-2011

Hello icsnettech,

welcome to the Polycom Support Community.

Please post the <mac>-boot.log and <mac>-app.log in order to verify that the phone is actually trying to load and apply the messagecentre.cfg

Best regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

FTP Provisioning of IP650 and IP331 failing to work.

FTP Provisioning of IP650 and IP331 failing to work.

Re: FTP Provisioning of IP650 and IP331 failing to work.