[FAQ] How can I check the PVOS, SIP, UCS / UC Software and BootROM / Updater Version?

[SteffenBaierUK]

EDIT:

In August 2022 Poly introduced the new Edge E phone with the renamedPVOS Poly Voice Software 

Any software from 8.0.0 is now called PVOS and no longer UC Software

EDIT:

In January 2018 Poly acquired ObiHai and Poly VVX 150, 250, 350, and 450 phones can be ordered with either Poly UC Software or ObiHai software. The D230, Poly Rove DECT Handsets and Base Stations can only run ObiHai software.

VVX150	6.3.x >	ObiEdition
VVX250	6.3.x >	ObiEdition
VVX350	6.3.x >	ObiEdition
VVX450	6.3.x >	ObiEdition
D230	7.0.x >	ObiEdition
Rove	8.0.x >	ObiEdition

Other older ObiHai phones are available.

ObiEdition:

Vie the Web Interface Status > System Status > Product Information

On the Phone press Home > Product Information and scroll down and the Software Version will be displayed

UC Software:

Since UCS 3.3.0 or later the UC Software and BootROM / Updater Version is shown on the Web Interface:

Pre UCS 3.3 0 (can be used in UCS 3.3.0 and newer as well):

Software Version

Press Menu Key => select Status => select Platform => select Application => select Main (shows SIP/UCS Version)

Press Menu Key => select Status => select Platform => select Phone (shows Part Number Version)

The above example would be a SPIP650

BootROM or Updater

• Press Menu Key => select Status => select Platform => select Phone (shows BootROM / Updater Version)

 

 or 

[SteffenBaierUK]

Since UC Software 5.4.0 we also support a multiple key combination to have easier access to such information.

Pressing on a VVX Phone the keys 1, 4 and 7 will display:

[SteffenBaierUK]

CCX Phones running in Teams mode

• Select the Hamburger Menu
  
  
  
• Select Settings
  
  
  
• Select Device Settings
  
• Select About
  
  The Poly UC Software will be displayed in section 1 and the relevant Microsoft Software in section 2