Logo

Double call issue with VVX 500

SOLVED
Knuckles95370
Occasional Advisor

Double call issue with VVX 500

Hello, 

I have a weird issue :
I have a first SIP line with 2 line key (and 1 call per each linekey)

I have a second H.323 line registered to our gatekeeper.

 

When I have a call on the first line, then I put on hold to make a second call for example, the line selected by default for the 2nd call is the H.323 line instead of the 2nd linekey of the SIP line.

 

It's quite annoying to change manually to the correct line for end users

 

I'm using version 5.9.1.

 

Do I miss something on the configuration side ? 

Message 1 of 3
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Double call issue with VVX 500

Hello @Knuckles95370 ,

 

welcome back to the Polycom Community.


Some or a couple of your old post(s) or reply(s) to them => here <= are still open / pending as you have not marked these as "Accept as a solution" or at least provided some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate ?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilise the community more efficiently. Please do not simply mark them without any type of feedback.

Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.

As you have not attached any configuration we do not know what you configured.

 

Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up post’s.

 

Dec 10, 2018 Question: How can I prevent a Polycom phone selecting a 2nd line instead of making another call on the same line?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

View solution in original post

Message 2 of 3
2 REPLIES 2
SteffenBaierUK
Polycom Employee & Community Manager

Re: Double call issue with VVX 500

Hello @Knuckles95370 ,

 

welcome back to the Polycom Community.


Some or a couple of your old post(s) or reply(s) to them => here <= are still open / pending as you have not marked these as "Accept as a solution" or at least provided some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate ?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilise the community more efficiently. Please do not simply mark them without any type of feedback.

Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.

As you have not attached any configuration we do not know what you configured.

 

Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up post’s.

 

Dec 10, 2018 Question: How can I prevent a Polycom phone selecting a 2nd line instead of making another call on the same line?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 2 of 3
Knuckles95370
Occasional Advisor

Re: Double call issue with VVX 500

Thanks for your help. It works !

Message 3 of 3