Hi,
We have Lync 2010 - Polycom cx700 (Latest Firmware).
The 700's are standalone (not connected to PC) - is there a Ext and Pin Login facility, as in the 500/600 range ?
Regards
Solved! Go to Solution.
Hello AlanG,
welcome to the Polycom Community.
To my knowledge the Polycom CX700 cannot sign in via a PIN,
Polycom and other manufacturers produce these optimized for Microsoft® Lync® devices after a reference design and the embedded OS running on the phones is provided, supported and maintained by our partner Microsoft®.
You therefore may want to reach out to the Microsoft® community and / or Microsoft® support directly instead as this is the most direct and efficient path.
Please try here
Best Regards
Steffen Baier
If official support is required please check how to phone or open a case here
----------------Hello AlanG,
welcome to the Polycom Community.
To my knowledge the Polycom CX700 cannot sign in via a PIN,
Polycom and other manufacturers produce these optimized for Microsoft® Lync® devices after a reference design and the embedded OS running on the phones is provided, supported and maintained by our partner Microsoft®.
You therefore may want to reach out to the Microsoft® community and / or Microsoft® support directly instead as this is the most direct and efficient path.
Please try here
Best Regards
Steffen Baier
If official support is required please check how to phone or open a case here
----------------Thanks Steffen,
Thought so, but just wanted to check.
Cheers