BLF Key assign to different line reg?

Occasional Contributor

BLF Key assign to different line reg?


In Poly UC or PVOS 8 software  (I am testing Edge E 550 specifically)  is it possible to define a BLF key that subscribes on a different line registration?

I have reg.1  reg.2  reg3 on this phone and most of the BLF keys should be on reg.1 which works fine, but I have two BLF keys I want to monitor on a different server on reg.2.  I am hoping there's a parameter to steer an attendant.resourceList entry to point at a different reg.  


This is possible in the Obi software, hoping UC/PVOS also has a way to do it!


Mark Hagler


Message 1 of 2
Polycom Employee & Community Manager

Re: BLF Key assign to different line reg?

Hello @MarkHagler ,


Welcome to the Poly Community.

No, you cannot.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




If official support is required please check how to phone or open a case here

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 2 of 2