3 way conference

[Anonymous]

I'm not sure if this expected behavior or not. Here is my scenario. I start a call from my VVX 500 once the call is connected I select the Confrnc softkey and dial a 2nd number then I connect the 3way call. All parties can hear each other. My understanding is that if the VVX 500 hangs up, the 3 way conference should disconnect. Actually when I hang up VVX 500 the 2 remote parties are still connected.

Phone Information Phone Model VVX 500 Part Number 3111-44500-001 Rev:A MAC Address xx:xx:xx:xx:xx:xx IP Address 10.4.9.150 UC Software Version 5.3.0.12074 Updater Version 5.5.0.13251

[SteffenBaierUK · Accepted solution]

Hello Shamrock,

welcome back to the Polycom Community.

Could I kindly ask you to please ensure to provide some feedback for your older posts if a reply from myself has helped you so other users can profit from your experience.

I can always recommend the Admin Guide matching your Software version.

Page 342 contains:

• call.transferOnConferenceEnd
  The behavior when the conference host exits a conference.
  If 0, all parties are disconnected when the conference host exits the conference.
  If 1, the other parties are left connected when the host exits the conference (the host performs an attended transfer to the other parties).

Best Regards

Steffen Baier

Polycom Global Services

[Anonymous]

Thank you that fixed the behavior.