Logo

how to change the position of the "mute"label ,"camera"label in the hdx 7000

SOLVED
drifter
Frequent Advisor

how to change the position of the "mute"label ,"camera"label in the hdx 7000

HDX 7000(V2.6.1)   have some label to show the situation of the system,but usually ,it locate in the bottom of the screen,one day  i see the label at the top of the screen.

 

 

how can i change the position to the bottom ? when i call up a EP,the label disappear,for example, you mute with the remote control,"mute" label never come out?

1 ACCEPTED SOLUTION

Accepted Solutions
polyschmertz
Polycom Employee & Community Manager

Re: how to change the position of the "mute"label ,"camera"label in the hdx 7000

Hi Drifter,

 

The placement of these icons is dependent on where the PIP is located.

 

If you press the PIP button on your remote to display the PIP, you will see that most likely it is at the bottom right or left of the screen.

 

If you press the PIP again, the PIP will have a yellow highlight around the edges.

 

If you continue to press PIP while it has the yellow highlight, you will be able to move it around the four corners of the screen and get the mute and camera labels at the bottom again.

Best Regards,
Richard

Please ensure you always check the FAQ's.

Please remember, if you see a post that helped you, and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer. Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.

View solution in original post

Message 2 of 3
2 REPLIES 2
polyschmertz
Polycom Employee & Community Manager

Re: how to change the position of the "mute"label ,"camera"label in the hdx 7000

Hi Drifter,

 

The placement of these icons is dependent on where the PIP is located.

 

If you press the PIP button on your remote to display the PIP, you will see that most likely it is at the bottom right or left of the screen.

 

If you press the PIP again, the PIP will have a yellow highlight around the edges.

 

If you continue to press PIP while it has the yellow highlight, you will be able to move it around the four corners of the screen and get the mute and camera labels at the bottom again.

Best Regards,
Richard

Please ensure you always check the FAQ's.

Please remember, if you see a post that helped you, and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer. Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 3
drifter
Frequent Advisor

Re: how to change the position of the "mute"label ,"camera"label in the hdx 7000

polyschmertz 

 

              thanks for you help.

Message 3 of 3