[Zoom] Poly G7500, Studio X50 and Studio X30 required before 30. May 2020

SteffenBaierUK
Polycom Employee & Community Manager

[Zoom] Poly G7500, Studio X50 and Studio X30 required before 30. May 2020

Hello all,

 

please be aware that all Poly G7500, Poly Studio X50 and Studio X30 will require 3.1.0-214052 >here< due Zoom implementing security features that require at least Zoom Software 5.0.0

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓ SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 1 of 1