Logo

X50 - partially blurred image

Long Hoang
Advisor

X50 - partially blurred image

When my X50 on Device mode via Poly Mode, image is partially blurred. 

Firmware version: 3.14.0

1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: X50 - partially blurred image

Hello @Long Hoang ,

 

Welcome back to the Poly Community.

 

I am not fully sure I understand as both pictures you attached are blurred.

 

Let's begin with how long is the USB / HDMI cable connected to the unit?

Has this always been an issue or has it only recently started?

 

The best and quickest way forward is to contact our Support organization as the community is run by volunteers only.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 2 of 2