Solved: Re: Unable to share content on X50 in Teams mode - Page 2

SteffenBaierUK · ‎12-30-2021

Welcome to the Poly Community.

Our Partner Microsoft is rolling this out at their leisure so you would need to work with them to have this checked.

On the TC8 you press more and the option should be there.

I would reboot the Studio X and TC8 and maybe try a factory reset just in case you had any special build from Poly support.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

MichalMoraszczyk · ‎12-31-2021

Hello, Steffen,

Unfortunately, reset to the factory settings of X50 hasn't solved the problem. Could you please explain what option you meant after pressing "more" button on TC8?

Best regards,

Michal Moraszczyk

SteffenBaierUK · ‎12-31-2021

Hello @MichalMoraszczyk ,

It seems the UI keeps changing. In my quick test on 3.9.0 the TC8, when idle, now shows the Share button. It also has this option when pressing the ... More button.

If on a call the TC 8 shows the Icon next to the Volume control on the left-hand side. I am on holiday until the next year so no option to post screenshots.

As suggested work with our Partner Microsoft as they need to enable the feature within the Teams tenant. We, Poly, cannot do anything.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

MichalMoraszczyk · ‎12-31-2021

Hello, Steffen,

I have this "Share" button in several pages/tabs. When I press it, however, the message "No device is connected. To project content, connect a device via HDMI" appears, despite the laptop is connected to HDMI input of X50 and in other work modes (e.g. Poly or Device Mode) it works fine and the picture from the laptop is displayed on the screen of a monitor connected to HDMI output of the codec. I'm attaching screenshot of this message.

Best regards,

Michal Moraszczyk

SteffenBaierUK · ‎12-31-2021

Hello @MichalMoraszczyk ,

Again thanks for providing this additional detail and clarification.

As you already confirmed this is working with the PolyOS AppI can only ask you to work with our partner Microsoft on this as they provide the Teams APK responsible for this.

Once done please share the Microsoft ticket reference so I can link this to any internal ticket we see for this.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

BrasserS · ‎02-15-2022

Hello All,

Is there a timeline that will include the audio?

Do you have a suggestion on how to work with Microsoft to include this feature?

Regeards

Sjoerd

SteffenBaierUK · ‎02-15-2022

Hello @BrasserS ,

Welcome to the Poly Community.

We, Poly, cannot advise on this as this is in the hand of our partner Microsoft. I believe the same is applicable for MTRoW.

Our device is capable of Audio and other partners are using this with their Applications. Contact Microsoft support or product management is the only advice I can give.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections