Solved: Touch control cannot place ISDN calls

Mark_Johnson · ‎02-19-2013

I have a touch controller (ver 1.6.0) paired with an HDX 7000 (ver 3.1.0) and when I try to place an ISDN call i get " The call cannot be completed because the ISDN number is unassigned" error message.

Without the touch controller I can sucessfully dial ISDN numbers both from the Global Address Book and manualy entered numbers.

Any thoughts? This will be a deal breaker.

TIA,

Mark

SteffenBaierUK · ‎02-19-2013

Hello Mark,

welcome to the Polycom Community.

We had some issues with the PTC and ISDN in the past but I am not aware that Software 3.1 has an issue.

I would suggest you raise this via your Polycom reseller to bring it to the attention of our Support Team in your geographical area.

Please ensure you provide the support package.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

SteffenBaierUK · ‎02-19-2013

Hello Mark,

welcome to the Polycom Community.

We had some issues with the PTC and ISDN in the past but I am not aware that Software 3.1 has an issue.

I would suggest you raise this via your Polycom reseller to bring it to the attention of our Support Team in your geographical area.

Please ensure you provide the support package.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Touch control cannot place ISDN calls

Touch control cannot place ISDN calls

Re: Touch control cannot place ISDN calls

Re: Touch control cannot place ISDN calls