StudioX50 Restart Behavior

[TellBryan]

Hello,

Currently we use our Polycom StudioX50 devices primarily with Zoom Rooms. 
We have scheduled the Polycom equipment to restart once a week every Saturday.

After the restart occurs, the Polycom controller PolyTC8 ends up at the BYOD screen.

From our Zoom account portal, the device shows as offline.
We have to manually interact with the device to exit BYOD mode to start the Zoom Rooms app.

At that point the hardware shows as "online" from the Zoom perspective. 

Is it possible to have the Polycom controller open the Zoom Rooms app automatically after a restart occurs?

Regards, 

Bryan

[SteffenBaierUK]

Hello @TellBryan ,

Welcome to the Poly Community.

It would be great if you could share all software versions used in this case. Also, how do you restart the Studio X?

The best and quickest way forward is to contact our Support organization as the community is run by volunteers only.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

[TellBryan]

Hi Steffan,

We are using:

Version 5.11.3 for the StudioX50s.

Version 5.13.5 for the PolyTC8 controllers.

The restarts are scheduled through the Zoom admin console.

We did have updates set to automatic until recently. 
Going forward we plan to manually schedule and perform the latest updates.

Please let me know if there is any other information that would be useful.

Thank you,

Bryan

[SteffenBaierUK]

Hello @TellBryan 

that is the Zoom version but not the Studio X version.

If this is done from the Zoom end I would suggest working with Zoom support on this as this is their App running on our devices and their app may have an issue restarting.

You can also use the REST API (in the FAQ) which can be used to restart both Studio X and the TC8 together.

Best regards

Steffen Baier

[mv01]

Hi all,

we are experiencing the same behavior with Poly X70 and Zoom Rooms.

Zoom Rooms 5.11.3.1619

Poly x70 Ver: 3.14.2

TC8 Ver: 4.0.0

Our Poly X70 integration must restart every day due to energy saving measures and ends up in the BYOD mode on TC8 what is really annoying for the user experience.

Any suggestions or will that be fixed soon?

Best,

Matthias

[SteffenBaierUK]

Hello @mv01 ,

Welcome to the Poly Community.

Considering we have released PolyOS 4.0 I would suggest you either try this (cannot downgrade to earlier versions) and/or get this into support so we can either check this on our end or refer you to our Partner Zoom so they can check on their end.

The best and quickest way forward is to contact our Support organization as the community is run by volunteers only.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier