Please see my system information below:
Model: Realpresence Group 500
System Software: Realease - 5.0.0-211246
I am having problems with ghost calls. However, now my main problem is I used the whitelist function and forgot to whitelist the IP address associated with this room system. Therefore, I cannot access the system via the web. I would like to avoid doing a factory reset if at all possible because my Polycom is out of warranty.
Your help is apprciated. Thanks!
Solved! Go to Solution.
Reset Systems --> ok
Connect with IP address of whitelist.
Give your computer a fixed IP address from the IP address block in the whitelist.
With cross cable, you can connect with the IP address of the whitelist.
Thanks, MrT. I have serveral questions:
1. HOW DO I FIND THE PUBLIC IP ADDRESS OF THE WHITELIST?
2. You state, "With cross cable, you can connect with the IP address of the whitelist." SO AM I CONNECTING A LAPTOP DIRECTLY TO THE POLYCOM?
Sorry, I got it wrong.
Whitelist> if there is no local network blog, you can not connect.
You will have to withdraw to factory settings. There will be no problem if there is no guarantee.
You can set it to factory settings with the remote control.
Thanks, Mr.T. Sorry, I do not quite understand your last sentence,
"There will be no problem if there is no guarantee. You can set it to factory settings with the remote control."
Also, even though my system is out of warranty, will I be able to update to the current software version I have installed, Release 5.0.0-211246?
Warranty it is no problem. You can upload.
If you send me the system serial number, I can check.
I JUST WANT TO BE ABLE TO ACCESS MY POLYCOM VIA THE WEB. I ALSO WANT TO KEEP THE CURRENT SOFTWARE VERSION. PLEASE TELL ME WHICH SETTINGS FROM THE IMAGE I SHOULD SELECT.
I found the following information on the internet:
Reset a RealPresence Group System
If the system is not functioning correctly or you have forgotten the Admin Room Password, you can reset
the system with Delete System Settings enabled. This procedure effectively refreshes your system,
deleting all settings except the following one:
To reset the system using the local interface:
1 Go to Settings > System Information > Diagnostics > Reset System.
2 Enable Delete System Settings.
3 Click Reset System.
After about 15 seconds, the system restarts and displays the setup wizard
WHAT IFNORMATION WILL I NEED TO ENTER FROM HERE?
What is Group500 local IP address ?? .
You can plug a lan cable from laptop to group 500 ( IP address of latop is in range IP with group 500 ) . If you can ping group 500 from laptop, you can then connect to it