Logo

Poly X50/TC8 with dual display in Teams mode crashes during the meeting

Matti Tossavainen
Occasional Visitor

Poly X50/TC8 with dual display in Teams mode crashes during the meeting

We haved faced several occasions where Poly X50/TC8 w/ dual displays in Teams mode chrashes during an online meeting. Cannot pinpoint exact/obvious cause to this issue. Anyone else experienced this issue? Any advise?

Message 1 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: Poly X50/TC8 with dual display in Teams mode crashes during the meeting

Hello @Matti Tossavainen ,

 

Welcome to the Poly Community.

Both the communities Must Read First or Read 1st and if available the FAQ reference the basic minimum information a new or follow-up post should contain.

This ensures the questions having to be asked are limited and any new or follow-up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.


Unfortunately, your post fell a bit short of the above-explained requirements and we kindly ask you, therefore, to ensure to read these sections and ensure a reply (not Edit!) provides as much detail as possible


Please ensure you familiarise yourself with the FAQs listed in my signature for your convenience.

 

The best and quickest way forward is to contact our Support organisation as the community is run by volunteers only.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 2 of 2