Poly TC8 stuck in loop trying to open Teams

sc_uk
Occasional Visitor

Poly TC8 stuck in loop trying to open Teams

We've got a Poly X50 + TC8 bundle for use with Teams.

 

I recently used the web interface of the X50 to upgrade to the latest software version of both X50 + TC8 due to the recent bug with Teams preventing the camera from working whilst in a call.

 

However now the TC8 is stuck in a loop opening the Teams app. I've attached a small video showing the problem.

 

I have tried switching the Provider back to Poly (which worked fine after the devices restarted) and back to Teams, but no luck. Both say "The software version is up-to-date."

X50 is on 3.9.1-360006

TC8 is on 3.9.0-210608

 

Please help us finally get a working X50 + TC8 for use with Teams!

Message 1 of 4
3 REPLIES 3
SteffenBaierUK
Polycom Employee & Community Manager

Re: Poly TC8 stuck in loop trying to open Teams

Hello @sc_uk ,

 

Welcome to the Poly Community.

 

I suggest you factory restore the TC8 and re-pair this. How to do this can be found >here<

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

 

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 4
Dan Hemsø
Advisor

Re: Poly TC8 stuck in loop trying to open Teams

Hi...

 

I have seen similar issue and it helped with an factory reset of the TC8.

So try it out as Steffen suggested 

 

/Dan

 

Message 3 of 4

Re: Poly TC8 stuck in loop trying to open Teams

Going back to this, It's best to wait to provision the TC8 until after you've provisioned the X50 first and it's done all of it's update.  

 

Current scenario - TC8 is on 3.9.0-210608 and the X50 is running latest 3.9.1-360006

 

Reset to Factory is the only way to remove this looping effect but only after all your updates and X50 is provisioned.  

Message 4 of 4