Is there a listing for the visca commands, in particular the preset commands, that are used in this camera? Apparently they are different from the Sony EVIHD1 camera, which this really is minus some components and switches on the circuit board. I'm attempting to use a 3rd party program to control the camera movements using a pc serial interface and a joystick. Everything works using the standard Sony visca commands except the presets. I'm using this as a stand-alone camera, not connected to the conferencing unit. Otherwise it works great.
As already explained in my other post these cameras are usually only for Polycom Video Conferencing usage and not for any direct usage.
Some original manufacturer implemented features may therefore not exposed on the Polycom variant of the camera.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
If official support is required please check how to phone or open a case here
---------------- The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.
⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓ SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓ Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections