POLYCOM MPTZ-7 VISCA COMMANDS

terryweasely
Occasional Contributor

POLYCOM MPTZ-7 VISCA COMMANDS

Is there a listing for the visca commands, in particular the preset commands, that are used in this camera?  Apparently they are different from the Sony EVIHD1 camera, which this really is minus some components and switches on the circuit board.  I'm attempting to use a 3rd party program to control the camera movements using a pc serial interface and a joystick.  Everything works using the standard Sony visca commands except the presets.  I'm using this as a stand-alone camera, not connected to the conferencing unit.  Otherwise it works great.

Message 1 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: POLYCOM MPTZ-7 VISCA COMMANDS

Hello terryweasely,

welcome to the Polycom Community.

As already explained in my other post these cameras are usually only for Polycom Video Conferencing usage and not for any direct usage.

 

Some original manufacturer implemented features may therefore not exposed on the Polycom variant of the camera.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2