Hi All,
Does Group series support polycom stereo speaker kit (Part Code: 2200-21969-240)?
Answers would be appreciated greatly
Regards
Muhd.Anees
Solved! Go to Solution.
Yes and no. I can understand what you mean by the arrow pointing to the center of the the audio waves. Though the arrow is pointing to the right. If you notice all output arrows point right and all input arrows point left. Sense the port has the arrow pointing to the right it would be the output audio for the GS 700. Also if the port wasn't there you couldn't do audio out if you were not using a HDMI connection on the GS 700.
You should be able to do a 3.5 to 3.5 connection from the main audio out of the Group Series. You would have to make sure you are not doing HDMI output source on monitor one. If you have using a HDMI connection you can always change the output video to DVI and it will force the audio out through the 3.5 audio port.
Russell, what about RPG 700? Does it have line out? I didn't find....
To the left of monitor 1. Were the Walta ports are there is a dual RCA audio output port for main audio. You can do a dual RCA to 3.5 connection to the speaker kit if using a Group Series 700.
Russell, thank you for answer! But does it mean there is an error in file
In this file Line Output about your are spoken marked as Line Input ...
Yes and no. I can understand what you mean by the arrow pointing to the center of the the audio waves. Though the arrow is pointing to the right. If you notice all output arrows point right and all input arrows point left. Sense the port has the arrow pointing to the right it would be the output audio for the GS 700. Also if the port wasn't there you couldn't do audio out if you were not using a HDMI connection on the GS 700.