Poly Sync 20 Multipoint Pairing

mdu
Occasional Contributor

Poly Sync 20 Multipoint Pairing

I discovered this more by accident than anything. You can connect to at least two Bluetooth devices while using a USB connection to a computer. I don’t even remember seeing this as a feature but I’m not complaining.

 

When I first received my speaker, I connected it via Bluetooth to my iPhone. Later I paired it to my iPad as well. I just assumed that it was only connecting to one device at a time, and it first appeared that way as well. However, the next morning I plugged into my work computer via USB and found that both my iPhone and iPad were connected as well.

Message 1 of 2
1 REPLY 1
Poly Mukesh
Polycom Employee & Moderator

Re: Poly Sync 20 Multipoint Pairing

Hello @mdu 

 

Welcome to Poly Community !!

 

Sync 20 is multipoint compatible and you can connect two mobile phones or one mobile phone and one BT600 at the same time via Bluetooth.



 

Best Regards,
Mukesh Kumar

Please ensure you always check the FAQ's.

Please remember, if you see a post that helped you, and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer. Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.

Message 2 of 2