Logo

Poly Sync 20-M Stereo profile lost after update to 1.1.24

stitesad
Occasional Visitor

Poly Sync 20-M Stereo profile lost after update to 1.1.24

Prior to updating to 1.1.24, (previous version installed was 1.1.20), the speaker had audio profiles on my windows PC of a 'SpeakerPhone' type and a separate profile for 'Stereo Speakers'.   So when I was listening to music or a video, it had a high fidelity audio output, but while on a call it was a speakerphone profile.   

 

now there is only the lower fidelity profile.  The speaker is connected to my PC via USB

Message 1 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: Poly Sync 20-M Stereo profile lost after update to 1.1.24

Hello @stitesad ,

 

Welcome to the Poly Community.


Please raise this via support. Details in my signature.

 

The best and quickest way forward is to contact our Support organisation as the community is run by volunteers only.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 2 of 2