Logo

Soundstation 2W base with pairing unit.

SOLVED
rbrand1
Occasional Contributor

Soundstation 2W base with pairing unit.

the Issue with the Polycom 2w is when the call off hook button is pressed to do a call out there is a ton of interefernce and no dial tone, it is really loud and piercing.  I checked all connections and the pairing base is fine. we get the bong when the unit is rebooted and it syncs to base fine.  the three leds light up.  i confirmed the phone cord Rj11 is fine. Rebooted the Audio codes ATA and even did hard shutdown of the unit.

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Soundstation 2W base with pairing unit.

Hello rbrand1,

welcome to the Polycom Community.

It is always useful to tell us a bit about the history of this unit:

 

  • Is this brand new or used?
  • If used did you purchase this used or have you had that for a while?
  • When did this start ?
  • Does it make the noise even without a line connected?


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections

View solution in original post

Message 2 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: Soundstation 2W base with pairing unit.

Hello rbrand1,

welcome to the Polycom Community.

It is always useful to tell us a bit about the history of this unit:

 

  • Is this brand new or used?
  • If used did you purchase this used or have you had that for a while?
  • When did this start ?
  • Does it make the noise even without a line connected?


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

If official support is required please check how to phone or open a case here

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------


⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
Message 2 of 2