|UC Software Version||126.96.36.1997|
|Phone Model||VVX 601|
We have a top level domain and lync as well as polycom devices are on the internal domain. We also dont have a proxy setup, we are using Palo Alto devices as internal firewalls for different sites that are connected. The polycom phones exists in these different sites.
We recently upgraded our DC in the environment setting with DHCP servers setup with failover partners.
Phones (with PIN sign in setup) that were online during the period maintained their connection. However once the rebooted they would lose connectivity. One work around was to sign in with a user account, and then sign out and sign in with PIN. Logs showed some information relating to certificates. However we not cannot sign in using accounts so that work around is now out the window. I suspect a certificate issue. Attempts to sign in end with the following in the sip logs
1212230353|nisvc|2|00|Invoker's nCommands,CurrentKey:2,(106)Responder 1212230353|nisvc|2|00|Response(-1)nisvc,(-1),(-1)proxy,(1001)AuthRsp,(Expiry,TransactionId,Time,Type):(-1,978773852,1639314233,1)IndicationCode:(200) Success 1212230354|sip |0|00|<<< Data received TLS 1212230354|sip |0|00| SIP/2.0 301 Redirect request to Home Server 1212230354|sip |0|00| Authentication-Info: TLS-DSK qop="auth", opaque="EA7A97D7", srand="E25AE29D", snum="1", rspauth="1b0b24e3fbe912220a69009f24c09ac267e88b10eb2dc18d118383e4df33bd47b676ab7d77d629c549127b0e359c8d8e", targetname="lyncserver.domain.internal", realm="SIP Communications Service", version=4 1212230354|sip |0|00| From: "94f2b91f-a14e-46de-9b66-5951c29088f9" <sip:94f2b91f-a14e-46de-9b66-5951c29088f9@domain>;tag=A546DC4F-C9CFF3EC;epid=64167f618dc4 1212230354|sip |0|00| To: <sip:94f2b91f-a14e-46de-9b66-5951c29088f9@domain>;tag=02A2E461B769FCC8B11FCCE38C74D8C2 1212230354|sip |0|00| Call-ID: 9a67509a92231a5ff10471e346618dc4 1212230354|sip |0|00| CSeq: 4 REGISTER 1212230354|sip |0|00| Via: SIP/2.0/TLS polycom_handset:63123;branch=z9hG4bK8b88fb97BF40774;ms-received-port=63123;ms-received-cid=8EFC600 1212230354|sip |0|00| Contact: <sip:lyncsba.domain.internal:5061;transport=tls>;q=0.7 1212230354|sip |0|00| Contact: <sip:lyncserver.domain.internal:5061;transport=tls>;q=0.3 1212230354|sip |0|00| Expires: 2592000 1212230354|sip |0|00| Content-Length: 0 1212230354|sip |0|00| 1212230354|sip |1|00|MsgSipTcpPacket 1212230354|sip |1|00|SipOnCommand: response 301,REGISTER fromtag :A546DC4F-C9CFF3EC toTag :02A2E461B769FCC8B11FCCE38C74D8C2 1212230354|sip |1|00|SipOnCommand: response 301,REGISTER matches user 1 of 1 '94f2b91f-a14e-46de-9b66-5951c29088f9' 1212230354|sip |1|00|signatureBuffer: <TLS-DSK><E25AE29D><1><SIP Communications Service><lyncserver.domain.internal><9a67509a92231a5ff10471e346618dc4><4><REGISTER><sip:94f2b91f-a14e-46de-9b66-5951c29088f9@domain><A546DC4F-C9CFF3EC><sip:94f2b91f-a14e-46de-9b66-5951c29088f9@domain><02A2E461B769FCC8B11FCCE38C74D8C2><><><2592000><301> 1212230354|sip |1|00|TLS-DSK:VerifySignature Succeeded 1212230354|sip |3|00|UA Client Non-INVITE REGISTER trans state 'callingTrying'->'completed' by 301 resp 10 timeout(0x42642b0) 1212230354|sip |2|00|[CTrans::ResponseProcess] REGISTER NonInv reTrans ALREADY stopped in 'completed' state at retryCount 0 code 301, timeout=10 (0x42642b0) 1212230354|sip |3|00|CTrans::ResponseProcess max CALL REDIRECT retries 7 reached 1212230354|sip |1|00|CStkDialog::SetDialogState: Dialog 'id04c3153d' State 'Trying'->'Confirmed' 1212230354|sip |3|00|CUser::OnRegistered Entry for call 0x395a7d0 with expires 0 ticks Transport 'TLS' inval Method 2 RROFO 0 1212230354|sip |0|00|CUser::OnRegistered isSfbPstnFailoverFeatureEnabled: 0, isSfbUserInFailoverMode: 0, pPstnCall: (nil) 1212230354|sip |3|00|CUser::NewWorkingServer user 0 oldServer 0 newServer 0 expires 0 1212230354|sip |3|00|SipOnEvNewWorkingServer User 0, old 0, new 0, expire 0 1212230354|so |3|00|[SoNcasC]: Handling SoNcasFailOverPending now 1212230354|sip |3|00|SipOnEvRegistrarUpdate User 0, index 0, state 0, expire 0, working 1 bIsOcs 0 prevIx -1 nStatusCode 480 isSfbOnPrem 1 1212230354|sip |3|00|CUser::HasNoCallCallInState for User 94f2b91f-a14e-46de-9b66-5951c29088f9,Index 0, total calls 1 state 'SubscribeAddressBook' rc 0 of type Not Applicable 1212230354|sip |1|00|removeContactUrlForO365User: O365Enabled='0' removeContactUrlForO365User='(nil)' 1212230354|sip |3|00|CUser::HasNoCallCallInState for User 94f2b91f-a14e-46de-9b66-5951c29088f9,Index 0, total calls 1 state 'ServiceSoap' rc 0 of type Not Applicable 1212230354|sip |1|00|CStkDialog::SetDialogState: Dialog 'id04c3153d' State 'Confirmed'->'Terminated' 1212230354|sip |2|00|CStkDialog::CStkDialog SetAddressLocal Config '94f2b91f-a14e-46de-9b66-5951c29088f9' <94f2b91f-a14e-46de-9b66-5951c29088f9@domain:0> 1212230354|sip |2|00|CStkDialog::CStkDialog AddressLocal set to Config 1212230354|sip |3|00|CStkDialog::SetAddressLocal localTag set to '' 1212230354|sip |3|00|CStkDialog::SetAddressLocal new address added of 1 1212230354|sip |2|00|CStkDialog::CStkDialog TAG 'EB12C7E6-AA4E7CFB' generated 1212230354|sip |2|00|CStkDialog::CStkDialog local addr '94f2b91f-a14e-46de-9b66-5951c29088f9' <94f2b91f-a14e-46de-9b66-5951c29088f9@domain:0> Tag 'EB12C7E6-AA4E7CFB' 1212230354|sip |2|00|CStkDialog::CStkDialog exit 0x3976300 local list size 1 1212230354|sip |2|00|CStkDialogList::CreateDialogObject localTarg usr '94f2b91f-a14e-46de-9b66-5951c29088f9' 1212230354|sip |3|00|Reg UAC Response: code 480 consecutive Attempts 676 baseTimeOut 10 maxTimeOut 180 exponTimeOut 180 randomTimeOut 98 1212230354|sip |3|00|Reg UAC Response: code 480 new m_nExpire 196 m_nOverlap 0 Trans 0x42642b0 1212230354|sip |3|00|SipStartFailOver 0 1212230354|sip |1|00|CStkDialog::TimeOut500ms: Client State txn finished REGISTER (0x397668c), z9hG4bK8b88fb97BF40774
support info package is attached.
I hope information provided is sufficient, but do let me know if I need me know if more info is required
Hello @Pavel_S ,
Welcome to the Poly Community.
Your post ended up in the Spam Filter so it was moved here.
Both the communities Must Read First or Read 1st and if available the FAQ reference the basic minimum information a new or follow up post should contain. It also contains FAQ posts covering well-known scenarios.
Unfortunately, your post fell a bit short of the above-explained requirements and we kindly ask you, therefore, to ensure to read these sections and ensure you utilize the FAQ when replying.
Jan 17, 2017 Question: How can I troubleshoot simple Skype for Business, Office365 or Teams issues?
Resolution: Have a look => here <=
If official support is required please check how to phone or open a case here----------------
Thank you @SteffenBaierUK,
You learn something new everyday.
I skipped the others as the issue seems to be separate from the common trouble shooting that I have done recently.
Nevertheless our support vendor had a look at it and it seemed to be a certificate issue. I wasn't aware of this change before hand and so was attempting to trouble shoot it.
Certificate changes have been made successfully and phones are now able to sign in.
Thank you for your time.
I will review the FAQ as well for my own benefit.