After an update we are now getting Warnings on our phones that say "Cannot charge devices using the rear usb port. Connect a power adapter to enable charging on the rear port." We don't have anything plugged into these ports and never have. Is this a bug or is there a way to disable this warning?
VVX601
Software Version: 5.8.2.4732
Real precense resource manager 10.4
Purchased through CDW
If official support is required please check how to phone or open a case here
----------------Thanks. I just opened a ticket and referenced your ticket below. My SR is 1-11329431681.
I confirm the same behaviour:
After upgrading the VVX601 to 5.8.2.4732 or to 5.9.0.9373 the warning message appears.
The following parameter from UC Software release 5.3:
feature.usbRear.power.enabled="0"
Will disable the warning, but it will also disable the USB port.
Hello all,
we have identified the root cause for this and will change the behaviour in a next release.
This will only happen if PoE is being used as the phone simply wants to tell the user that smart phones with a higher demand cannot be charged using the USB back port.
The message pop up will be removed and we simply display this in the warnings.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------Issue still present on v5.9.1.0615 release a few day ago
Hello @LuisR ,
there is no Release Noted fix for this as this is not fixed in the UC Software 5.9.1 build
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------Yes, upgraded as a test to 5.9.1.0615 and started to receive this after running 5.8.x for 6 months.
Annoying to say the least, along with the BToE version issues requiring visits to every computer to remove/update BToE due to compatitility issues.
That and the annoying USB which we put our company logo on for screen saving purposes now shows this message with no way to disable it in the config.
2 steps forward, 3 steps back. Reverting back to 5.8 and the old BToE I guess, not acceptable these annoyances.
Hello @techlogik ,
welcome back to the Polycom Community.
If it would be reported via the documented official channels we would have an earlier start on this and could have fixed this before.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
If official support is required please check how to phone or open a case here
----------------