Hello,
I have put a CCX 400 into operation today. After the CCX 400 has started a registration for the Team Portal is coming.
Under Admin Settings --> Ip Adress there is no information, so I could access the Web GUI of ccx.
How do I get Skype for Business druaf on a CCX which is used with teams.
Solved! Go to Solution.
Hi
What is current firmware version on your CCX400? Older FW versions supported only Teams.
Please upgrade to the latest release (at the moment - 6.2.22) and check again.
Also, depending on your current version - please refer to release notes as you may be needed to follow a specific upgrade procedure.
You should also read a post mentioned by SteffenBaierUK.
Cheers
Lukasz
Hello buenyamin.demirezen@mtu.de ,
Welcome back to the Poly Community.
Please check >here<
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
If official support is required please check how to phone or open a case here
----------------I´m nor sure if you can or you can´t access the GUI, but if you can´t, have a look here:
Hi
What is current firmware version on your CCX400? Older FW versions supported only Teams.
Please upgrade to the latest release (at the moment - 6.2.22) and check again.
Also, depending on your current version - please refer to release notes as you may be needed to follow a specific upgrade procedure.
You should also read a post mentioned by SteffenBaierUK.
Cheers
Lukasz