Hello @wastedtime9 ,
welcome to the Poly Community.
From the RPRM Admin Guide >here<
In addition:
- When Trio and GroupSeries are paired, you can configure Trio with the GroupSeries software to uprade to. The Trio will store the parameter and will be passed to GroupSeries during a reboot, repair or change to the following parameter.
mr.deviceMgmt.vc2.param.softwareUpdateUri="https://10.228.9.127/download/AndroidRepositories/groupSeries/Beta-6.1.8-430263/"
- If you need to replace the internal IP 10.228.9.127 with an external routable FQDN, use the following parameter:
mr.devicemgmt.vc2.param.software.UpdateProxyServer=“rprm.polycom-mslab03.com”
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
----------------
If official support is required please check how to phone or open a case here
----------------
The title Poly Employee & Community Manager is a community setting and
does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.
----------------
⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓SIGNATURE ⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓⇓
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
Please also ensure you always check the VoIP , Video Endpoint , Microsoft Voice , PSTN or other FAQ's in the different sections
