Problem after upgrading KWS300 to PCS09 doing FTP provisioning

Problem after upgrading KWS300 to PCS09 doing FTP provisioning

We have some KWS300 running doing provisioning via FTP to central server.

After having some problem with reboots, we upgraded the firmware to PCS09.


After that the KWS300 doesn't seem too try FTP, instead it tries TFTP, regards of what we put in provisioning URL.


The provisioning URL is


In the log we see Download: 'tftp://ip-address of' - curl: (68) getpeername() failed with errno 107: Transport endpoint is not connected


Does anyone experience the same? Any clue on what is wrong?


Regards, Jan Berggren

Message 1 of 2
Polycom Employee & Community Manager

Re: Problem after upgrading KWS300 to PCS09 doing FTP provisioning

Hello Janne_Berggren,


without looking at your config.xml and/or a exported log troubleshooting is difficult.


I spoke to the Developer and he is unable to reproduce this issue.


I would suggest you work with your Polycom Reseller and/or Polycom Support to get this raised.


Please provide some feedback once the issue is solved.


Best Regards


Steffen Baier


Polycom Global Services


If official support is required please check how to phone or open a case here

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2