Part number needed for a H51

Occasional Visitor

Part number needed for a H51

Hello I have a Plantronics Supra H51 that I need that part number for the rubber grommet at the ball at the top of the stainless steel voice tube. This part fits between the headset and the 1/4 turn retainer and the stainless voice tube.


Any insight would be appreciated, Thanks.

Message 1 of 3
Poly Mukesh
Polycom Employee & Moderator

Re: Part number needed for a H51

Hello @ToddHoag 


Welcome to the Poly community.


Please take a look at the Poly Supra spares and accessories list and see if it helps you.  


10757-01 - Background noise suppressor (BNS) kit 
40703-01 - 10' headset extension cable, Quick Disconnect (QD)-to-QD 
40711-01 - 10' lightweight headset extension cable, QD-to-QD
21846-03 - Black extension cord (old {ArticleLink Urlname="RN8369" Label="QD"} connector) 
26716-01 - Standard headset-to-amplifier connection cable, QD-to-modular connector 
27190-01 - Polaris headset-to-phone connection cable, QD-to-modular connection
45673-01 - Flat 10' cable
43220-01 - Clothing clip
15729-05 - 2-pack ear cushions
61871-01 - 2-pack soft ear cushions
19025-01 - 2-pack leatherette doughnut ear cushions
17590-03 - Black monaural headband
10778-01 - QD cord clip
43548-01 - QD in-line momentary mute switch
40705-01 - Value pack, noise-canceling voice tubes, H51N and H61N
40704-01 - Value pack, voice tubes, H61 and H61
17593-01 - Voice Tube, Clear 
17593-20 - Voice tube, Outrageous Orange
17593-30 - Voice tube, Passion Pink
17593-40 - Voice tube, Serene Green
17593-50 - Voice tube, Peaceful Purple
17593-60 - Voice tube, Cool Blue
17593-70 - 6-pack voice tubes, rainbow
24316-01 - Windscreen for microphone tip 
27019-03 - Y-adapter training kit with mute and QD clamp 
18015-01 - Black binaural headband
22096-02 - Circumaural ear covers 


Best Regards,
Mukesh Kumar

Please ensure you always check the FAQ's.

Please remember, if you see a post that helped you, and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer. Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.

Message 2 of 3
Occasional Visitor

Re: Part number needed for a H51

Hi, thank you for responding. None of the parts listed has the rubber grommet I need. I am attaching a photo to help you and your team identify it. the purpose of the grommet is to hold the voice tube adapter in posistion after you adjust it. Now it just flops loose and hangs down.


Thank you again for helping, Todd.